MOTORBIKE 1/2/3 YEAR CERAMIC COATING
Temperature resistant up to 750 degrees, applied to all surfaces
Wash, Decontaminate and apply coating only prices:
One Year Ceramic Applied (Bike guard Ceramic)
Combination of Ceramic King (Two Year Coating) & Bikeguard
Three Year Ceramic Applied (Bike Guard Pro)
All packages include wash, decontamination and preparation for ceramic coating application but exclude machine correction.
Bike Guard Pro
Bike Guard Pro, has been developed for the needs of motorcycles. It can be applied to all surfaces of the bike, gloss paint, matt paint, chrome exhaust and plastic screens leaving a 9h flexible layer of Si02. It's temperature resistant up to 750 degrees. Bike Guard Pro is highly hydrophobic and chemical resistant.
It has been designed to leave an Anti-Corrosion layer that last for 3 years.
BIKE-GUARD CERAMIC - 12 MONTHS PROTECTION
• 9H hard.
• 12 months protection
Wheels cleaned with various brushes.
Wheel iron deposits and staining removed.
Wheel tar deposits safely removed.
Vehicle pre-rinsed to remove loose dirt
Lowers soaked in APC.
Application of Snow Foam to the whole vehicle.
Thorough pressure rinse.
Exterior bodywork surfaces washed using the 2 Bucket Method.
Tar safely removed from all exterior surfaces
Iron contamination safely removed from exterior surfaces
Whole vehicle clayed to remove remaining bonded surface contamination if required.
Vehicle given a final rinse then towel and blow dried.
Panel wipe / IPA wipe down
Ceramic coating professionally applied to all suitable materials and allowed to cure
We can use this ceramic coating on all parts of your car, motorbike, quad bike etc.
Applied traditionally to larger panels but also sprayed into hard to reach and tight areas, protecting all areas and bolts etc.